Video Demonstration : Create vApp in vCloud Director

-

Comments

Post a Comment

Popular posts from this blog

"Host IPMI system event log status" alarm in vCenter Server

-
To resolve this issue, ensure that the NTP settings are correct on the ESXi host, clear the IPMI System Event log file, and reset the sensors.   To clear the IPMI System Event log file and reset the sensors: Open vCenter Server using the vSphere Client. In the vCenter Server Inventory, select the ESXi/ESX host. Click the  Hardware Status  tab. Click  System Event log  under View. Click  Reset Event   Log . The red alert is removed from the System Event log. Click  Reset Sensors  to reset the host sensors. Starting with ESXi 5.1 U2, 5,5 P01 and later, you can use the  localcli  command line to clear the IPMI SEL logs. To clear the IPMI SEL logs in ESXi 5.1 and later: Connect to the ESXi host through SSH.  Run this command: localcli hardware ipmi sel clear If you find an incorrect date and if you are unable to reset the logs: In ESX - Restart the management agents and  sfcbd...
Read more

Virtual machines appear as invalid or orphaned in vCenter Server

-
Symptoms Virtual Machines show as invalid or orphaned in vCenter Server Virtual Machines show as invalid or orphaned after a VMware High Availability (VMware HA) host failure occurs Virtual Machines show as invalid or orphaned after an ESX host comes out of maintenance mode Virtual Machines show as invalid or orphaned after a failed DRS migration Virtual Machines show as invalid or orphaned after a storage failure Virtual Machines show as invalid or orphaned after the connection is lost between the vCenter Server and the host where the virtual machine resides You see one or more of these errors when trying to start a virtual machine: Could not power VM, no swap file, failed to power on VM. VMControl error -11: No such virtual machine. A general system error occurred. The system returned on error. Communication with the virtual machine may have been interrupted In   C:\ProgramData\VMware\VMware VirtualCenter\Logs\vpxd.log   file, you see entries similar to: [11...
Read more

ESXi : Lost uplink redundancy on virtual switch "vSwitch0". Physical NIC vmnic0 is down

-
We had an issue suddenly getting an alert : Lost uplink redundancy on virtual switch "vSwitch0". Physical NIC vmnic0 is down. Affected portgroups:"vMotion", "Management Network". So as a troubleshooting Select the ESXi host effected Click on Configuration, Select Networking, Click on vSwitch0 Properties,Click on Network adapters Select on vmnic0, Click on remove, Click on Close Again Select Networking, Click on vSwitch0 Properties,Click on Network adapters, Click on Add, Select the vmnic0, Click on Next, Click on Next, Click on Finish Now Click on Ports tab of vSwitch Properties, Select on vMotion, Click on Edit, Click on NIC Teaming, Select on vmnic1, Click on Moveup button  to Active Adapters, Select on vmnic0, Click on Move Down to Standby Adapters, Click on OK Now Click on Ports tab of vSwitch Properties, Select on Management Network, Click on Edit, Click on NIC Teaming, Select on vmnic1, Click on Moveup button  to Active Adapters, Select o...
Read more